ECCO 95.010G & ECCO 95.025G
3D SENSOR TO MEASURE FLAT TRANSPARENT OR SPECULAR SURFACES

Delivering superior 3D data quality in a compact design, the ECCO 95.010G and ECCO 95.025G have been developed to scan flat glass and specular, highly reflective surfaces. Combining our reliable ECCO 95 sensor technology with an optimised lens and optics, it provides a high-accuracy, high-resolution, high-speed scanning solution.


  Datasheet ECCO 95G

ECCO 95.010G
ECCO 95.025G

PROPERTIES & BENEFITS

  Designed specifically to measure glass and specular surfaces

  High-speed 3D scanning

  Superior 3D image quality

  Ultra-high-resolution imaging

  Economic and compact


ECCO 95.015ECCO 95.025
Typical field of view (near | mid | far) (1)11 mm | 12 mm | 11 mm25 mm | 28,5 mm | 25 mm
Typical measurement range (1)5.6 mm15 mm
Stand-off distance23.5 mm64 mm
Typical vertical resolution (Z) (1)0.42 – 0.54 µm1.4-1.9 μm 
Typical lateral resolution (Y) (1)6.0 µm – 6.8 µm13.0 – 14.5 µm
Mounting distance65 mm89 mm
Laser wavelength450 nm (brilliant blue laser)450 nm (brilliant blue laser)
Laser class (standard)3R3R
Maximum points/ 3D profile19201920
MountingSensor mounted at 21° pitch angle (sensor is shipped with mounting adapter)Sensor mounted at 14.5° pitch angle (sensor is shipped with mounting adapter)
WeightApprox. 775 g (includes mounting adapter)Approx. 825 g (includes mounting adapter)
Z-linearity (2), (5)0.015 %0.024%
Z-repeatability (4), (5)0.15 µm0.4 μm
   
part numbers3.004.191 (laser class 3R)3.004.191 (laser class 3R)
Typical scan rate (3)Approx. from 1 kHz up to 10 kHz (with full FOV)Approx. from 1 kHz up to 10 kHz
Typical 3D point rate (3)Approx. from 0.7 up to 15 million points/secApprox. from 0.7 up to 15 million points/sec
InterfaceGigabit Ethernet ( 1 Gbit/ sec)Gigabit Ethernet ( 1 Gbit/ sec)
Inputs2 x Inputs, 5 – 24 VDC
Quadrature Encoder (AB-Channel, RS-422 Standard)
2x Inputs (5 – 24 VDC)
Quadrature Encoder (AB-Channel, RS-422 standard)
Outputs2 x Outputs, 24 VDC (max. 20 mA)2 x Outputs, 24 VDC (max. 20 mA)
TriggerSTART Trigger support on Input 1 – 2
DATA Trigger support on Quadrature Encoder Input (Max. DATA trigger rate: 1 MHz)
DATA Trigger support on Input 2 (Max. DATA trigger rate: 10 kHz)
START Trigger support on Input 1 – 2
DATA Trigger support on Quadrature Encoder Input (Max. DATA trigger rate: 1 MHz)
DATA Trigger support on Input 2 (Max. DATA trigger rate: 10 kHz)
Input voltage | Power24 VDC ± 15% 17W24 VDC ± 15% 17W
Maximum ambient light10,000 lx10,000 lx
EMC testas per EN 61 000-6-2, EN 61 000-6-4as per EN 61 000-6-2, EN 61 000-6-4
Electrical safetyas per EN 61 010-1-3as per EN 61 010-1-3
Protection classIII, as per EN 61 040-3III, as per EN 61 040-3
Enclosure ratingIP65IP65
Air humidityMaximum 90%, non-condensingMaximum 90%, non-condensing
Temperature (operation | storage)0 – 40° C | -20 – 70° C0 – 40° C | -20 – 70° C
Compatible accessoriesPower-I/O-Encoder cable: 6.320.0XX
Ethernet cable: 6.303.0XX
Power-I/O-Encoder cable: 6.320.0XX
Ethernet cable: 6.303.0XX

 

(1) Typical values can vary up to 5% due to optical tolerances

(2) Z-Linearity calculated as a variation of “bias” (reference value vs. measured value) over the measurement range

(3) Scan rate & point rate are dependent on the configured field of view, measurement range and exposure time. A ‘scan’ by definition considers maximum points/3D profile i.e. full FOV. The typical scan/point rate range has been estimated considering an exposure time of 1 µsec, min-max MR and full FOV. The typical scan rate can be further boosted by windowing the FOV

(4) Experimentally assessed by scanning a fixed measurement target 4100 times successively within short time interval. No post-processing filters applied

(5) Measurements performed on a SmartRay standard artifact which is an aluminium flat matt surface painted matte white

Powered by MakeWebEasy.com
This website uses cookies for best user experience, to find out more you can go to our Privacy Policy  and  Cookies Policy